This video is a High Flow Open Cup Acrylic Pour on an 8x10 Canvas using four vibrant colors to achieve what I consider to be a stunning piece. The only medium I used to dilute my paint was GLUE, WATER & FLOETROL! As always Thank you all so much for watching, Subscribing and Sharing.

The following colors were used for the Fluid Art Open Cup Pour in this video:

Black
Deep Violet
Peacock Pearl Metallic
Yellow Ochre
Pink

ART & ACCESSORIES FOR SALE: [ Ссылка ]
SHOP MY SUPPLIES: [ Ссылка ]

With this technique, you should touch a little more black, as much colour is displaced by the pour and you can not finish the edges with too little black.

Have fun casting acrylic, do not forget to subscribe to my channel so you will not miss a recent video.

Many Thanks
Candice

---------------

What do you need for acrylic pouring/fluid painting?

In acrylic pouring or fluid painting, diluted acrylic paints are cast on the canvas using various techniques. This results in quite random results. Every picture is unique.

----------------
1. acrylic paint
----------------

You can use what you like here. Acrylic paints from brand companies usually have a thicker consistency and therefore lower consumption. Cheap brands are often thinner, you need a little more color. These are the bands I mainly use.

Look for what suits you and your wallet. Possibly. you have to adjust my Pouring recipe, which comes down below with your acrylic paint something.

[ Ссылка ] (advertising Amazon.com*)
[ Ссылка ] (advertising Amazon.com *)

---------------------
2. The Pouring Medium
---------------------
The only pouring medium I used was a 60/40 Glue & Floetrol mix with a bit of water.
The Pouring Medium ensures that the acrylic paint is fluid and pourable. There are now many varieties available. Liquitex is also a good option, even without silicone oil beautiful cells are possible.

[ Ссылка ] (Glue) (advertising Amazon.com*)
[ Ссылка ] (Floetrol) (advertising Amazon.com*)
[ Ссылка ] (Liquitex) (advertising Amazon.com*)
[ Ссылка ] (advertising Amazon.com *)

--------
3. Water
--------

Only acrylic paint and casting medium is usually not enough, the colour must be made a little more liquid, but I use normal tap water. In the end, the ready-mixed colour should flow evenly off the stirring tool like warm liquid honey.

---------------

4. Final treatment
------------------

If the pictures have dried after about 3-5 days, the acrylic paint will not shine as well as when wet. To restore this shine, use the Pouring Medium. But you can also use a special gloss varnish to create even more shine.

[ Ссылка ] (advertising Amazon.com *)

Otherwise, you only need a canvas in its preferred size and a few cups to touch the colours.


----------------------
My acrylic pouring recipe
----------------------


1 part colour
1 part Pouring Medium
1/2 part of water

!!! Important, the canvas must first be primed with Acrylic Pouring Medium or paint otherwise, the edges absorb too much paint.

----------------------------------------
Cast acrylic - quantity calculation
How much colour is needed for his canvas?
----------------------------------------

Approximately 0.3 grams per square centimetre, this is the complete mixture meant. Suppose you have a canvas of 40 x 40 cm = 1600cm2. Calculation 1600 x 0.3 grams = 480 grams of the complete mixture so all colors, pouring medium and water added up.

For a 40x40 cm two-color image, the mix looks like this:

Rounded up to 500 grams so that no later color is missing:

100 g of colorful paint
100 g of fluid medium
50 g of water

100 g white color
100 g of fluid medium
50 g of water

On the bottles is usually a millilitre indication, you can take that in grams, 250 ml color is not exactly 250 g, but the difference does not matter.

свернуть