In this video we look at a replacement rotary controller for the Chinese Diesel Heaters/Parking heaters.
Controller on Amazon: [ Ссылка ]
ERROR CODES:
--------------------------
E00 - NO ERROR
E01 - Under voltage - your battery does not have enough power, please recharge.
E02 - Over voltage - Voltage is over the permitted level, reduce voltage to 12v.
E03 - Glow plug fault. Check leads and replace if necessary. Can be low voltage.
E04 - Fuel pump disconnected. Check lead to fuel pump, check connector is clicked in place. Can be low voltage.
E05 - Overheat. Check air intake is not restricted at rear of heater, check fan is not impeded. Ensure that the installed heat vent is not blocked / restricted. Also check that heating duct has not been crushed, thus restricting air flow.
E06 - Fan motor fault - Normally caused by low voltage.
E07 - Communication between controller and heater broken, check lead and connection plug. Again can be low voltage.
E08 - Low fuel or air in fuel lines - refuel vehicle, check fuel filter is full if fitted. Can be low voltage.
E10 - One or more of the above error codes and the unit has been restarted a number of times without success.
