Install an American Standard One-Piece Toilet in 11 Easy Steps

1. Turn off water supply
2. Remove old toilet & clean base area in preparation for the new toilet install
3. Install closet bolts into flange channel
4. Firmly press wax ring onto the bottom of the bowl
5. Gently align and place the toilet down
6. Tighten the bowl down to floor with bowl retaining hardware and install bowl caps
7. Tighten supply line by hand
8. Install toilet seat per the supplied seat instructions (hardware will vary slightly depending on toilet model)
9. Turn on water supply
10. Allow toilet tank to fill with water, then flush the toilet.
11. Adjust water level if required per supplied toilet instructions


Find the right parts for your next project:
[ Ссылка ]


Contact our Online Support Team for additional guidance: [ Ссылка ]

свернуть