To Replace your Shot Scope V3 strap
Remove the strap, screwdriver and spare screws from the packaging.
Use the screwdriver provided to remove the screws by unscrewing them in an anticlockwise direction.Pull the straps away from the screen once the screws are removed. The Shot Scope straps will now be detached from the screen.
To attach the new straps
Clip the buckle strap to the bottom of the screen where the Shot Scope logo is.Insert the screws into the screw holes and tighten in a clockwise direction.
Clip the strap with the RFID label to the top of the screen, inset the screws and tighten. For the Performance Tracking to work the straps must be set up this way round. Remove the information label and ensure the straps are tight by giving each side a gentle pull.
Your watch is now ready to play!
Shot Scope straps are available to buy at: [ Ссылка ]
Note: Screws and Screwdriver appearance may vary from what is shown in video.
It is important to note that only straps produced by shot scope can be attached onto a watch.
Its also important to note that placing a V3 shot tracking strap (Power-sense strap) onto a G3 will not enable performance tracking on a G3 watch.
